Custom Closet Cabinetry in South Fulton, GA
For custom Closet Cabinetry in South Fulton, ask which items the selected supplier actually has available, which require an order and how availability will be confirmed. That is the first room most owners plan to upgrade. Custom closet cabinetry in South Fulton, GA converts that empty box into a working system with double-hang sections, a drawer tower and shelving at multiple heights. South Fulton Cabinet Pros sizes every tower to the stud layout so the anchors hit framing on every wall.
- Itemized written quotes
- Measured before ordering
- Semi-custom to full custom
Request a written quote
Or call (562) 203-3232. Calls only, we do not receive text messages.
About our custom walk-in closet cabinetry
Confirm the South Fulton supplier's for custom Closet Cabinetry in South Fulton current collection or delivery options, applicable charges, location and access arrangements before planning the job. A full owner's closet in a new South Fulton build has the floor area for a complete wardrobe once the right system goes in. Double-hang on two walls handles shirts, blazers and folded pants. A drawer tower handles folded items and accessories. Request a current list of available custom Closet Cabinetry in South Fulton sizes, finishes and hardware options, and verify the chosen products before reserving an installation date.
Why South Fulton Cabinet Pros
How We Work
One conversation in your home, one measure, one written quote, then an install date.
From one wire shelf to a system
Production builders in South Fulton and across Fulton County design large owner's closets into their floor plans as a selling feature. The closets are spacious: a six-by-eight footprint or larger is common in homes built after 2010. The upgrade is left to the first owner.
It does not differentiate by garment length, offers no folded storage, and the wire surface marks soft goods placed directly on it. A rod that runs the full width of the closet puts everything at the same depth, which means items toward the center press against the back wall and are hard to reach from the door side.
For most South Fulton owners, this upgrade happens in year one or two, well before a kitchen remodel, because the closet is used every morning and the gap between what the room can hold and what it does hold is visible daily.
Hanging on studs in a new house
A closet system anchors to the wall. In new construction, that means anchoring to framing, because the walls are drywall over wood studs and drywall alone will not carry a loaded system. Stud layout in a new house runs on sixteen-inch centers in most bearing walls, sometimes twenty-four inches in non-load-bearing partitions. That spacing sets the positions where a tower can land a fastener into solid wood.
This matters at the layout stage, before anything is ordered. A tower that falls between two studs can be caught with a horizontal nailer installed behind the drywall, but that adds patch work and a repair pass. The cleaner approach is positioning every tower around the stud locations from the start. A measure visit in a new South Fulton house begins with a stud finder on each wall, not a catalog, because the framing determines what a layout can actually anchor to.
The back wall of a walk-in typically offers the most stud options because it runs parallel to the hallway or adjacent room and the framing is predictable. Side walls near the door frame can have irregular spacing because of the rough opening for the door. Confirming stud locations before finalizing the drawing means fastener positions are planned in advance rather than improvised during installation.
Layouts for a six-by-eight owner's closet
A six-by-eight walk-in is twelve square feet, which is enough for a two-person wardrobe system without a custom floor plan. The standard approach for this footprint: double-hang on the back wall and one side wall, a single-hang run for long dresses and full-length coats on the other side wall, and a drawer tower in the corner or as a standalone unit at the center of the aisle.
Double-hang stacks two rods at separate heights. The upper rod sits at roughly fifty-four to sixty inches from the floor, the lower rod at roughly twenty-four to thirty inches. Shirts, blazers and folded trousers hang on the upper rod, shorter items on the lower. A six-foot back wall with double-hang holds roughly twice the hanging capacity of a single rod at the same width.
A drawer tower at eighteen to twenty-four inches wide handles folded shirts, accessories and smaller folded items. Five to seven drawers is a standard count for that unit at full height. Dovetail drawer boxes and soft-close undermount slides are available at the semi-custom and custom grades and extend the working life of the drawer significantly compared to side-mount hardware on a lighter-duty system.
A long-hang section, from floor height to a rod set at roughly sixty-six inches, handles full-length dresses, coats and robes without folding. This combination of double-hang on two walls, one long-hang run and a drawer tower fills a six-by-eight closet without dead corners and without requiring a fully custom layout.
Closet pricing in South Fulton
Closet cabinetry pricing depends on the footprint of the closet, the grade of construction, the number of drawers versus shelved sections, the finish and the hardware. For custom Closet Cabinetry in South Fulton, request an itemized quote showing box sizes, door and drawer choices, fittings, finish and installation scope rather than relying on a general price range. Compare the South Fulton proposal for custom Closet Cabinetry in South Fulton by scope: retained components, new boxes, hardware, delivery, removal and any separate trade work should be identified before you judge the total.
The choices that move the price within those ranges are box material (plywood boxes carry a higher unit cost than particleboard, and substrate selection depends on manufacturer edge sealing and weight requirements), drawer count (each drawer unit costs more than an open shelved section of equal width), finish type (painted MDF runs differently from stained white oak, rift-sawn oak or walnut), and hardware grade (soft-close undermount slides cost more per drawer than side-mount slides but extend the life of the system).
A larger closet, ten feet by ten feet or more, adds linear footage and tower count, which increases both material and labor cost. Wall repairs to the old anchor holes are included in the installation scope on most projects.
The figures above are estimates for custom closet system in southfulton, subject to change, and the written quote sets the final price.
The process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
We call back, talk through the room and what you want from it, and set a time to visit.
Measure and design
A field measure, then a layout with door style, finish and hardware you can see before you commit.
Written quote and order
An itemized quote with the lead time on it. Cabinets are ordered against the measured drawing once you sign.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
More of What We Build
Service area
Where We Work
Questions
Custom Walk-In Closet Cabinetry: Common Questions
What happens to the wire brackets when the old shelf comes out?
For custom Closet Cabinetry in South Fulton, ask which items the selected supplier actually has available, which require an order and how availability will be confirmed. The walls behind them in most new South Fulton builds are undamaged drywall, and the anchor holes from the old brackets are patched before the new towers go up. No separate drywall repair call is needed in most cases.
How does the layout get designed for my specific closet?
The measure visit records the full room: floor dimensions, ceiling height, stud locations on each wall, door swing, any HVAC vents and any electrical outlets or fixtures. Confirm the South Fulton supplier's for custom Closet Cabinetry in South Fulton current collection or delivery options, applicable charges, location and access arrangements before planning the job. The drawing is reviewed and signed off before any order is placed, so a change to the layout carries a known price before work begins.
How long does a closet project take from measure to finished install?
Lead time depends on the grade selected. Request a scope-based schedule for custom Closet Cabinetry in South Fulton, including countertop work, service connections and any return visits rather than assuming a standard duration. Custom cabinet-grade work runs roughly eight to sixteen weeks, as an estimate. The measure visit confirms the current lead time for the specific line before the order is placed. For custom Closet Cabinetry in South Fulton, confirm current product availability and the proposed delivery and installation sequence before committing to dates.
What finish options work best inside a closet?
Painted maple and painted MDF in a bright white or off-white finish are the most common choice in new South Fulton construction because they read clean against white trim and stay consistent with the rest of the primary suite. Stained white oak, rift-sawn oak and walnut add visible wood grain and warmth for owners who prefer that look. Thermofoil is available on some semi-custom lines. The finish is selected at the design stage alongside door style.
How can I confirm address coverage for custom closet cabinetry for south fulton, ga?
Before requesting custom closet cabinetry for south fulton, ga, confirm address coverage rather than relying only on a nearby city name. Call to confirm the current service schedule for your specific area before booking the measure visit.
What does the written warranty cover?
For custom closet cabinetry in south fulton, ga, confirm available warranty terms in writing. The terms are detailed in the quote. Ask at the measure visit for the current written warranty terms so they are on record before the order is placed.
Talk to us about custom walk-in closet cabinetry
Tell us about the room, in South Fulton or anywhere in the service area, and we call back to set up a visit.
Calls only, we do not receive text messages.