Cabinet Refacing in South Fulton, GA
Many South Fulton homes built between the 1950s and 1990s still have original cabinetry, but not all are worth keeping. The boxes in older homes were often built with plywood, while 1990s installations frequently used particleboard that should be inspected for edge swelling or moisture damage. Cabinet refacing in South Fulton, GA, can renew the look without replacing the structure, if the structure is sound.
- Itemized written quotes
- Measured before ordering
- Semi-custom to full custom
Request a written quote
Or call (562) 203-3232. Calls only, we do not receive text messages.
About our cabinet refacing
South Fulton Cabinet Pros evaluates your existing boxes during the design visit to determine whether refacing is the right choice. For cabinet Refacing in South Fulton, ask the selected provider to confirm whether this work or service is offered and identify what is included in the written scope. Call to schedule a visit and get a written quote that explains your options clearly.
Why South Fulton Cabinet Pros
How We Work
One conversation in your home, one measure, one written quote, then an install date.
Which era's boxes are worth keeping
In South Fulton, homes from the 1950s and early 1960s often feature site-built cabinets made from thick plywood, with dovetail drawer joints and solid wood frames. These boxes, even with worn finishes, typically remain structurally stable decades later. In contrast, many homes built in the 1990s used particleboard boxes with thin veneers and glued joints that fail under moisture or repeated use. This reverses the common assumption that older cabinets are always worse. A 1950s box in East Point or Hapeville is often more durable than a 1990s box in Union City or Fairburn. During the design visit, we inspect the box material, joint integrity, and moisture damage to determine if refacing is viable.
Thermofoil doors and what refacing can do
Confirm the cabinet Refacing in South Fulton constraints for the specific property and design rather than treating a general description as an exemption or structural guarantee. The material delaminates over time, especially near sinks and stoves, and paint won’t adhere reliably. Refacing these kitchens means removing the old thermofoil doors and drawer fronts entirely and installing new ones. The old boxes stay, but the visible surfaces become new. This is not a paint job. It’s a full door and drawer front replacement that preserves the original cabinet structure while delivering a modern look. For the South Fulton refacing assessment, ask the provider to inspect the existing door coating and explain which preparation or replacement methods it supports.
Keeping the countertop
The biggest financial advantage of refacing over replacement is keeping the existing countertop. Compare the South Fulton proposal for cabinet Refacing in South Fulton by scope: retained components, new boxes, hardware, delivery, removal and any separate trade work should be identified before you judge the total. Refacing avoids this entirely. The new cabinet doors and drawer fronts are designed to align with the existing countertop edge, and the height of the base cabinets is preserved. This means no new sink cutouts, no plumbing adjustments, and no resealing of seams. The savings are real and immediate. We measure the countertop during the design visit to confirm alignment and ensure the new doors sit flush. If the countertop is cracked, stained, or uneven, we’ll say so, and recommend replacement. But if it’s structurally sound, keeping it is the smartest move.
Cabinet refacing cost in South Fulton
Cabinet refacing cost depends on the number of doors and drawers, the material of the new fronts, and the complexity of the layout. Ask how the quoted cabinet Refacing in South Fulton option changes with cabinet construction, drawer count, specialty fittings and site preparation; confirm which materials and work are actually included. A simple slab door in painted MDF is at the lower end; a custom inset door in rift-sawn oak or walnut is at the higher end. The cost includes removal of old doors and drawer fronts, installation of new ones, new hardware, and minor adjustments to hinges and slides. Adding features like soft-close hinges, undermount drawer slides, or glass inserts increases the total. Crown molding, light rail, and toe kick are included if they match the existing profile. Refacing does not include demolition of boxes, wall repairs, or countertop replacement. The figures above are estimates for cabinet refacing in southfulton, subject to change, and the written quote sets the final price.
Refacing is chosen when the layout works and the boxes are sound, which is the case in many of these older kitchens. A 1950s kitchen carries the original cabinet footprint and timber, and a 1990s kitchen brings the same construction era across dozens of subdivisions, so the door and drawer replacement matches the existing boxes without a full rip-out. The finish and hardware are selected to the room, and the install runs over the existing counters and plumbing, so the room stays usable through most of the job and the written quote reflects the actual measured scope rather than a guess.
The decision between refacing and replacement comes down to the box. If the frames are plumb and dry and the layout does not need to change, refacing is usually the lower-cost, shorter-time path. If the boxes are warped or the floor plan is changing, a full replacement is the honest recommendation. The design visit checks the existing structure and walks through both options with a written quote, so the choice is made on the measured room, not on a preference.
The same kitchen, refaced
BeforeAfterThe process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
We call back, talk through the room and what you want from it, and set a time to visit.
Measure and design
A field measure, then a layout with door style, finish and hardware you can see before you commit.
Written quote and order
An itemized quote with the lead time on it. Cabinets are ordered against the measured drawing once you sign.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
More of What We Build
Service area
Where We Work
Questions
Cabinet Refacing: Common Questions
Can you reface cabinets with particleboard boxes?
Yes, if the boxes are structurally sound, no warping, no rot, no broken joints. Many 1990s particleboard boxes in South Fulton are still stable enough for refacing, especially if they haven’t been exposed to water. We inspect the box integrity during the design visit and only proceed if the structure will hold new doors and drawers securely for years to come.
Do you install new drawers during refacing?
We only replace the drawer fronts, not the entire drawer box. If the existing drawer slides are worn or the box is damaged, we recommend full replacement. Refacing keeps the original drawer boxes, so their condition is critical. Soft-close undermount slides can be added to existing drawers if the box is compatible.
What’s the difference between refacing and painting?
Refacing replaces the visible parts, doors and drawer fronts, with new ones made of wood or MDF. Painting coats the existing surfaces, which often peel or chip within a year, especially on thermofoil or poorly prepared wood. For cabinet Refacing in South Fulton, ask the selected provider to confirm whether this work or service is offered and identify what is included in the written scope. Refacing delivers a lasting, professional result without the risk of peeling or uneven finish.
How long does cabinet refacing take?
Ask the selected South Fulton supplier for cabinet Refacing in South Fulton to distinguish manufacturing, delivery, site preparation and installation stages, and record any dependencies in the project schedule. The design visit confirms the scope and order. The new doors and drawer fronts are custom-built to match your style and dimensions. Request a scope-based schedule for cabinet Refacing in South Fulton, including countertop work, service connections and any return visits rather than assuming a standard duration. The timeline depends on the door style and material, not the number of cabinets.
Do you handle HOA approvals for refacing in South Fulton?
For cabinet Refacing in South Fulton, ask the selected provider to confirm whether this work or service is offered and identify what is included in the written scope. Many South Fulton neighborhoods require approval for visible changes to exteriors or kitchen exteriors. Confirm who will handle the proposed South Fulton work for cabinet Refacing in South Fulton, which documents or samples can be provided and which responsibilities remain with the homeowner or another contractor.
What does the written quote include?
The written quote itemizes every door and drawer by size, material, and finish, lists all hardware, includes removal and installation, and notes any added features like soft-close or glass inserts. It also confirms whether the existing boxes are approved for refacing. Review the itemized quote before any work begins, and confirm the scope at the design visit.
Do you offer a written warranty?
For cabinet refacing in south fulton, ga, confirm available warranty terms in writing. Ask at the design visit for the current terms before the order is placed.
Talk to us about cabinet refacing
Tell us about the room, in South Fulton or anywhere in the service area, and we call back to set up a visit.
Calls only, we do not receive text messages.